3D Core Transformer

General

FARADY S11-M.RL, S13-M.RL series of three-dimensional triangular wound core transformer breaking the traditional planar structure, use symmetrical three-phase three-dimensional structure, the product is completely symmetrical three-phase core magnetic circuit reluctance greatly reduced, excitation current and significantly reduce the unload loss,which is a use of traditional materials,

but runs quieter, more compact energy-efficient transformers.

Its energy saving, environmental protection material on the outstanding performance of the province, and in full compliance with the energy policy.

Standard

1.IEC60076-1: 1993 Power transformers

2 GB1094.1-1996 power transformers

3 GB6451-2008 oil-immersed power transformers technical parameters and requirements

4 JB / T10088-2004 6kv-500kv power transformer sound level grade.

Product Features

1 .saving energy: 40-50% reduction in no-load loss, load loss reduction 7-10%;

2.reduce line losses: No-load current is reduced more than 90%;

3.ultra-quiet: 10-15 dB noise reduction;

4.No interference: MFL reduced by more than 50%;

5.conservation of raw materials: copper, iron cost reduction of 20-30%;

6.significant economic benefits: variable costs fell 17.2 percent ten years than the new S9 style.

Service condition

a) Suitable for indoor or outdoor application

b)Air temperature:

Maximum temperature: +40℃; Minimum temperature:-30℃

c) Humidity:

Monthly average humidity 95%; Daily average humidity 90% .

d) Altitude above sea level:

Maximum installation altitude: 2000m.

e)Max wind speed:35M/s

f) Ambient air not apparently polluted by corrosive and flammable gas, vapor etc.

g) No frequent violent shake

Note: * Beyond those services condition should enquiry to manufacturer technical dept during order

Technical Specification

Note: The above parameter is only subject to our standard design, special requirement can be customized